Main technical parameters of Q1325/Q1327/Q1330 pipe threading lathe
|
Item |
Unit |
Q1325 |
Q1327 |
|
Max dia.swing over bed |
mm |
800 |
800 |
|
Max dia.swing over cross slide |
mm |
470 |
470 |
|
Max.length of work-piece |
mm |
1500 |
1500 |
|
Maximum machining length |
mm |
1250 |
1250 |
|
Pipe threading range |
mm |
Φ50-250 |
Φ50-273 |
|
Width of bed |
mm |
600/650 |
600/650 |
|
Spindle bore |
mm |
255 |
280 |
|
Spindle center height |
mm |
400 |
400 |
|
Power of spindle motor |
KW |
11 |
15 |
|
Range of spindle speed |
15-100/100-350 VF2 steps |
20-100/100-300 VF2 steps |
|
|
Z axis feed grade /range |
mm/r |
32/0.095-1.4 |
32/0.095-1.4 |
|
X axis feed grade /range |
mm/r |
32/0.042-0.7 |
32/0.042-0.7 |
|
Carriage raid traverse speed |
mm/min |
3740 |
3740 |
|
Cross slid raid traverse speed |
mm/min |
1870 |
1870 |
|
Metric thread grade/range |
mm |
22/1-15 |
22/1-15 |
|
Inch thread grade/range |
T.P.I |
26/14-1 |
26/14-1 |
|
Traverse of cross slide |
mm |
430 |
430 |
|
Max. Traverse of turret |
mm |
250 |
250 |
|
Tailstock quill travel |
mm |
250 |
250 |
|
Tailstock quill Dia. |
mm |
100 |
100 |
|
Tailstock quill taper |
Morse NO.6 |
Morse NO.6 |
|
|
Chuck |
Φ630 4- jaw chuck |
Φ630 3- jaw chuck Φ780 4- jaw chuck |
|
|
Overall dimensions(L*W*H) |
mm |
3750×1650×1500 |
3850×1650×1600 |
|
Machine weight |
T |
8.2/8.9 |
8.5/9.2 |
Introduction
The Handle Pipe Threading Machine Lathe is a precision equipment designed for processing large diameter pipe threads, which is widely used in the oil, gas, chemical and other industries.
Parts
Bed
The bed is the basic component of the machine tool, carrying all other components. Its guide rail width is usually 550 mm. It is made of high-strength cast iron material. After ultrasonic quenching treatment, the hardness can reach HRC52, ensuring the rigidity and stability of the machine tool.
Spindle box
The spindle box is equipped with a spindle. The spindle aperture is generally 205 mm. It adopts an integral gearbox spindle unit with a wide speed regulation range to achieve efficient cutting. The front and rear of the spindle box are equipped with chucks to facilitate the clamping and processing of large-diameter pipes or rods.
Chuck
The chuck is used to clamp the workpiece. It is usually equipped with front and rear double pneumatic chucks to ensure double-position clamping of long pipes and higher stability.
Tool holder
The tool holder is used to install the tool. Usually a four-station tool holder is used to facilitate the operator to change the tool and improve the processing efficiency.
Tailstock
The tailstock is used to support long workpieces. It is usually equipped with an adjustable tailstock sleeve to ensure stability during processing.
Lubrication system
The machine tool is equipped with an automatic lubrication system to ensure the lubrication of all parts, reduce wear and extend service life.
Cooling system
The machine tool is equipped with a powerful cooling system, which not only reduces the spindle temperature, but also effectively maintains the cleanliness and lubrication of the spindle box.
FAQ
Q: What is a Handle Pipe Threading Machine Lathe?
A: A Handle Pipe Threading Machine Lathe is a manually operated machine used for cutting threads on pipes. It is specifically designed for creating precise internal and external threads, essential for connecting pipes in various industries like plumbing, oil, gas, and construction.
Q: How does a Handle Pipe Threading Machine Lathe work?
A: The machine holds the pipe securely while rotating it. The operator manually feeds the cutting tool into the rotating pipe, creating threads by removing material. The process can be adjusted for different pipe sizes and thread types, including tapered and straight threads.
Q: What types of threads can be created with a Handle Pipe Threading Machine Lathe?
A: It can create both external and internal threads, such as straight threads (for non-tapered pipes) and tapered threads (for pipes like those used in plumbing or oil pipelines). The machine is suitable for a variety of pipe thread standards, including NPT (National Pipe Thread) and BSPT (British Standard Pipe Taper).
Q: What materials can be processed on a Handle Pipe Threading Machine Lathe?
A: A Handle Pipe Threading Machine Lathe can process a wide range of materials, including steel, stainless steel, copper, brass, and aluminum. These materials are commonly used in industrial applications where strong, durable pipe connections are required.
Q: What is the threading capacity of a typical Handle Pipe Threading Machine Lathe?
A: The threading capacity typically ranges from ½ inch to 4 inches in diameter, though some models can handle larger sizes. The specific capacity depends on the machine's design and the threading die heads used, allowing the user to adjust for different pipe sizes and types.
Hot Tags: q1327 handle pipe threading machine lathe, China q1327 handle pipe threading machine lathe manufacturers, suppliers, factory, ck6163 cnc vertical machine lathe
